NDP12 WM

Leading edge dimming
Leading edge dimming is a type of phase control where the turn on at each half cycle is delayed from the zero crossing point so that the first voltage presented to the load after the zero crossing is the rising or “leading” edge of the voltage.

 

USB
Software update is possible via USB port located on device. Same USB port is also used for transfer of settings, data backup and other functions

 

1P+N protection
A device equipped with the 1P+N protection of output channels requested by some legal authorities.

 

2.3kW 10A

 

3kW 13A

 

3.7kW 16A

 

SRS GENERATOR TECHNOLOGY
SRS Generator is a technology that uses a unique module which makes it possible to run the dimming devices even on generators that do not have stable frequency output. The result is smooth dimming without any fuzziness.

 

SRS THERMAL MANAGEMENT
SRS devices are 100% duty cycle rated – they can run at full load, continuously, for any length of time without overheating. The heat sink is big enough to keep the temperature on low level that guarantees reliability and long time functionality. That is the reason why our units are more than 30% heavier than competitors’ units.

 

SRS S-DRIVE TECHNOLOGY
Removes any barriers of the minimum load connected to the dimmer output. It does not matter whether you are using the inductive load or resistive load – the dimmer will always have smooth dimming, starting from the zero loads to the maximum loads.

 

SRS VARIOSPEED FAN
Mag–Lev fans are used. These fans are extremely quiet and have a life span that is almost ten times longer than the bearing fan. We use variable speed control depending on the inner temperature and load of the circuits.

 

SRS STUDIO RISETIME
SRS Studio Risetime guarantees that the Risetime of the dimmer channels is not less than 400μs measured 10–90% on nominal load. 400µs risetime is a top of value currently used in TV studios environment.

 

SRS 5–YEAR WARRANTY
Under our 5–year warranty, we guarantee repairs or replacements of our product without any fees, in the shortest time possible.

 

WIRELESS DMX
Unit can be equipped with wireless DMX radio module for the DMX signal receive function. One of following W-DMX cards can be built in the device: Wireless Solution or LumenRadio.

 

DELTA / STAR
A device can be equipped with the DELTA/STAR main power input.

 

RDM compatible
DMX device equipped with the RDM module for remote monitoring and setting through the DMX in accordance with the RDM specification.