SRS-GROUP

SW UPDATE

Software update is a feature that uses a USB to RS485 cable for the software update. Using the SW-UPG cable, devices that are not equipped with a USB port can be connected to the computer. (Some restriction may apply!)

SRS VARIOSPEED FAN

Mag–Lev fans are used. These fans are extremely quiet and have a life span that is almost ten times longer than the bearing fan. We use variable speed control depending on the inner temperature and load of the circuits.

SRS GENERATOR TECHNOLOGY

SRS Generator is a technology that uses a unique module which makes it possible to run the dimming devices even on generators that do not have stable frequency output. The result is smooth dimming without any fuzziness.

SRS THERMAL MANAGEMENT

SRS devices are 100% duty cycle rated – they can run at full load, continuously, for any length of time without overheating. The heat sink is big enough to keep the temperature on low level that guarantees reliability and long time functionality. That is the reason why our units are more than 30% heavier than competitors’ units.

SRS LIFE-TIME WARRANTY

No questions, no complains, no refused warranty repairs. Repair or replacement of our product without any fees in the shortest time possible. During warranty repair we will supply a replacement device for free.

SRS 5–YEAR WARRANTY

Under our 5–year warranty, we guarantee repairs or replacements of our product without any fees, in the shortest time possible.

SRS CUSTOMIZATION

We can offer you hardware or software customization of the product. There is also the option to create a brand new device according to your needs.

VARIABLE DMX CONNECTORS

WIRELESS DMX

Unit can be equipped with wireless DMX radio module for the DMX signal receive function. One of following W-DMX cards can be built in the device: Wireless Solution or LumenRadio.

DELTA / STAR

A device can be equipped with the DELTA/STAR main power input.

RDM compatible

DMX device equipped with the RDM module for remote monitoring and setting through the DMX in accordance with the RDM specification.

SRS STUDIO RISETIME

SRS Studio Risetime guarantees that the Risetime of the dimmer channels is not less than 400μs measured 10–90% on nominal load. 400µs risetime is a top of value currently used in TV studios environment.

SRS WORLDWIDE USAGE

Devices created for worldwide usage, equipped with the full range power supply.

SRS WIRELESS TRUE OUT

Converts wirelessdmx to the regular DMX signal and splits to all DMX outputs. This saves your money for additional wireless receiver and also offers you the option to use the other DMX equipment connected to an Wireless true out capable device.

SRS 2-YEAR WARRANTY

Under our 2–year warranty, we guarantee repairs or replacements of our product without any fees, in the shortest time possible.

SRS SWITCH CONTROL

Device controlled by DMX and also by the switch – all over the DMX cable. That allows you to use the device without the DMX console even on small venues or as a part of a scene controlled by actors on stage.

SRS S-DRIVE TECHNOLOGY

Removes any barriers of the minimum load connected to the dimmer output. It does not matter whether you are using the inductive load or resistive load – the dimmer will always have smooth dimming, starting from the zero loads to the maximum loads.

CE certified

All SRS products are CE certified and safe to use according the safety, machinery or low voltage directives.

1P+N protection

A device equipped with the 1P+N protection of output channels requested by some legal authorities.

1P+N protection with relay

A device equipped with the 1P+N protection of output channels requested by some legal authorities. There are both phase and neutral switched via relay

3kW 13A

1.4kW 6A

2.3kW 10A

3.7kW 16A

5.7kW 25A

7.4kW 32A

12kW 53A

USB

Software update is possible via USB port located on device. Same USB port is also used for transfer of settings, data backup and other functions

Double pole relay

This device is equipped with double relays per channel for each output. It is requested by some legal authorities. Both phase and neutral are switched by a relay.

RCBO

RCBO is a combination of RCD life protection device that is usually 30mA and the MCB magnetic circuit breaker in a single device. It helps to reduce space in high-density systems and offers highest level of life protection to avoid unnecessary tripping of RCDs. This is done thanks to its multi-channel leak detection.

HYMAG RCBO

HYMAG RCBO is a combination of RCD life protection device that is usually 30mA and the HMCB hydraulic-magnetic circuit breaker in a single device. It helps to reduce space in high-density systems and offers highest level of life protection to avoid unnecessary tripping of RCDs. Always keep rated current within the temperature range -40ºC - +85ºC.

Leading edge dimming

Leading edge dimming is a type of phase control where the turn on at each half cycle is delayed from the zero crossing point so that the first voltage presented to the load after the zero crossing is the rising or “leading” edge of the voltage.

Pulse-width modulation dimming

Pulse-width modulation dimming is a method of reducing the average power delivered by an electrical signal, by effectively chopping it up into discrete parts. The average value of voltage (and current) fed to the load is controlled by turning the switch between supply and load on and off at a fast rate.

PoE Enabled

Our devices support Power over Ethernet (PoE), allowing both power and data to be transmitted through a single Ethernet cable. This simplifies installation, reduces wiring needs, and ensures flexible power management, making it ideal for smart lighting systems and connected environments.

Features