FAQ

CMC24-DIGI-AHD            24 channels, 2xLED, all channels static - no display, no options for setup of AHD controller       

ADR24-DIGI-AHD-T19    24 channels, dynanic, TFTdisplay,+encoder we will add group control function soon, full options for setup of AHD controller       

ADR24-DIGI-AHD-T192C 24 channels, dynanic, TFTdisplay+encoder, we will add group control function soon, full options for setup of AHD controller, 2x link connector for possible USB connection for remote - designed for permanent application where is no access to controller for local update 

We're using various link systems.

1. MCP and MCBC controllers are working with 4pin XLR connectors. All 4 cores need be used.

2. GMC, GMD, AHD controllers are working with 5pin XLR connectors. Only 1-3 cores are needed as is RS485 link, the pin 4+5 are used as DC power source for Cable remotes.

3. WMC controllers are working wiht 3pin XLR connectors. Only 1-3 cores are needed as is RS485 link.

These three letters says how we handle wrong phase align on hoist controller power in:

• MPA: manual phase align - unit works even with wrong phase align - client can adjust align by twisting pins in input plug = output can be 123 or 132 as client decide
• BPA: manual phase align with blocked function when phases are not aligned good - client MUST align phases by twisting pins in input plug = output is always 123
• APA: automatic phase align - we do it automatically without any intention of user = output is always 123